Watcher Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.


Welcome to Watcher Forum
 
HomeLatest imagesSearchRegisterLog in

 

 FLASH: All EPA Radiation Detectors Nationwide Suddenly OFFLINE

Go down 
AuthorMessage
Guest
Guest




FLASH: All EPA Radiation Detectors Nationwide Suddenly OFFLINE Empty
PostSubject: FLASH: All EPA Radiation Detectors Nationwide Suddenly OFFLINE   FLASH: All EPA Radiation Detectors Nationwide Suddenly OFFLINE I_icon_minitimeMon Feb 24, 2014 10:05 am

http://investmentwatchblog.com/alert-all-epa-radiation-detectors-nationwide-suddenly-went-offline-right-after-high-level-plumes-released/

FLASH: All EPA Radiation Detectors Nationwide Suddenly OFFLINE
Sunday, 23 February 2014 19:58
February 23, 2014 -- (TRN) -- For the first time, all Radiation Detectors in the nationwide "RADnet" operated by the U.S. Environmental Protection Agency (EPA) are suddenly "OFFLINE." Right now, this nation is completely, totally vulnerable to the movement of radioactive materials into positions to enable an attack and we would have no warning whatsoever. This is the perfect opportunity for a "dirty bomb" attack or some type of "false flag" attack against ANYPLACE in the ENTIRE United States.*** THIS STORY IS UPDATED BELOW AS OF MON. FEB. 24. ***

EPA is claiming there is a "technical glitch." No word on when -- or if -- RADnet will be operational again.

UPDATE: Monday, February 24, 2014 -- It now appears that the OFFLINE status of the EPA "RADnet" may be **DELIBERATE.** According to sources in New Mexico, the "RADnet" had to be shut down to conceal the leak of radiation from the Waste Isolation Pilot Plant (WIPP) in Carsbad, New Mexico, which is onlging and presently spreading radiation into the air from its ventilation system. That plant is the only location in the United States that receives, processes, then stores (deep underground) radioactive materials from former nuclear warheads.

The WIPP suffered an "incident" on February 10, wherein radiation detectors at the WIPP sounded an alarm that radiation was coming out of the ventilation system. Within a brief time, the ventilation system went into "filtration mode" to filter any air that was coming out of the underground storage area.

According to the POTRblog.com (POTR), a proven reliable source with inside information on the internal happenings at the WIPP Plutonium disaster has provided a radiation reading for Saturday 2/22/14, taken before and after HEPA filtration of the exhaust air from the WIPP mine shaft. Based on that information, and using risk mitigating assumptions, POTR calculated that Plutonium and Americium are CURRENTLY being RELEASED INTO THE OUTSIDE AIR at a rate of 400,000 Disintegrations Per Minute (DPM), for every single minute the ventilation system is running. For those more comfortable with the Becquerel as a unit of measure, that works out to the plant exhausting 6,667 Becquerels of Plutonium and Americium PER MINUTE into the outside air.


The POTR source reported that at Station A (prior to HEPA filtration) that the small amount of air which is being sampled returned a reading of several hundred DPM's; and that the POST HEPA FILTERED AIR was reading approximately 20 DPM's.


WIPP planning documents indicated that their ventilation system has 3 fans, which which add up to at total ventilation capacity of 20,000 Cubic Meters of Air per minute. The ventilation system has 4 circuits. It is unclear which circuits are running, or at what rates. It is also unclear if there are even higher concentrated released going out of the other shafts at the plant. But given the information available, the wise risk mitigation based measurement for current releases is 400,000 DPM's every single minute.


It is also important to note that the sampling filters are tiny in comparison to the over all airflow, only a small subset of air is measured. The photos of the Station A sensors/ filters show a pipe roughly 1/2 inch in diameter as the air sample source. The actual exhaust pipe is tall enough for a person to walk in. The plant also has 4 ventilation zones, it is unclear which zones are currently being ventilated. Hence 400K DPM per minute is the MINIMUM Radiation release number on which a wise person would base risk mitigation decisions.


During the first 30 seconds of the disaster before HEPA filtration started, POTR calculated that a Plutonium + Americium cloud of 6.6 BILLION DPM's (110,000,000 Becquerels) passed by a radiation monitor 1/2 a mile North West of the Plant.


Those numbers do involve assumptions forced upon POTR by Department of Energy (DOE) because they don't release the full context of the their detections (they prefer to use Bananas as a basis of radiation exposure). POTR numbers are based on conservatively risk mitigating public health exposure, with context derived from WIPP data gleaned from the EPA permitting documents.

In that regard, understand that when WIPP release this data in a few days, you can expect AT BEST they will only mention 20 DPM being measured. Don't expect them to deliver the truthful context of what that means, nor should you expect them to release the RAW DATA and info to check their calculation. It is of utmost importance to them that they control the narrative of what is happening at WIPP.

More details as they become available.
MORE@LINK ABOVE

Back to top Go down
 
FLASH: All EPA Radiation Detectors Nationwide Suddenly OFFLINE
Back to top 
Page 1 of 1
 Similar topics
-
» La Tuna Fire explodes to 8,000 acres, largest such blaze in LA history; 10 percent contained Email You need Flash to watch this video. Sorry, your browser doesn't support Flash, needs a Flash update,
» RADIATION ALERT!!!!=RADIATION DISASTER IN WASHINGTON STATE - EVACUATIONS ORDERED - No Fly Zone Imposed ! ! !
» Comparing Japan’s Radiation Release to “Background Radiation”
» WON'T GO AWAY = Disney installs metal detectors, bag searches and pat downs at hotels and park entrances
» Q POSTS 02-18 Multi drops

Permissions in this forum:You cannot reply to topics in this forum
Watcher Forum :: Welcome! :: General Discussion-
Jump to: