Orders Now Being Taken

Sheilding Body Heat from the bad guys detection devices above.
See the link Details.. it is expensive but what is 1 life worth?

flee to the wilderness


http://westernrifleshooters.wordpress.com/2014/08/10/mvt-shield-orders-now-bring-taken/



MVT Shield – Orders Now Being Taken

Posted on August 10, 2014 | Leave a comment

******
Details here; money grafs:
******
USE:

The MVT SHIELD is designed primarily for use in a static position, to be strung up like a shelter tarp, taking advantage of the air gap between the person underneath and the thermal shield properties of the tarp to defeat FLIR. Uses: rain shelter, thermal shield, emergency thermal blanket, primarily designed as static shelter but can be pulled over you in an emergency. The MVT SHIELD can be carried in a pack or pouch and deployed into a thermally shielded shelter as needed. The product is supplied with a stuff-sack pouch, with the packed size of that pouch being 12″ x 6″.

PRODUCT DETAILS:

The MVT SHIELD is 68″ x 88″ (5.6′ x 7.3′), coyote brown on both sides, weighing 2.5 lbs. It is constructed using a double layer of two strong, lightweight nylon tarps. The tarps are rugged, 1.9 oz rip-stop nylon with a waterproof, urethane coating. To allow deployment the tarps are constructed with reinforced webbing tie-outs, three per side including corners. In addition to the perimeter tie-outs there are also three additional tie-outs across the center ridge-line to aid deployment.

Thermal Shield Properties:

Between the two layers of the nylon tarps is sandwiched a double layer of LDPE-4 heat-reflective material, each layer individually blocks blocks 97% of body heat emissions when held in contact with the body. Each single layer is 30%-50% thicker than a standard thermal blanket, making it more durable. It is also protected by the exterior sandwiching nylon tarps. The interior thermal layer is puncture-resistant and does not fracture if the edges are nicked, as metallized polyester blankets do. The layer is softer and quieter than products made from metallized polyester (“Mylar”), or the cheaper metallized polypropylene, which rattle with every movement.

Best use of the this product as a thermal shield and camouflage shelter will be attained when utilized with conventional camouflage and concealment techniques, in particular terrain masking and camouflage utilizing foliage and/or the tree canopy. The MVT SHIELD has been tested utilizing FLIR thermal imagers. When correctly deployed as a shelter tarp with an air gap between the person underneath and the MVT SHIELD, there is no body heat transfer through the SHIELD, making the occupant invisible to detection by FLIR/thermal imagers.

ive been thinking about getting something like this for awhile.....thanks